Flow meters and consumption meters from CS Instruments work according to the calorimetric measuring principle. This means, while measuring the thermal mass flow or standard volume flow, no additional temperature and pressure compensation is necessary. The standard volume is a common volumetric unit used to compare gas quantities at different pressures and temperatures. In order to meet various standards, the reference conditions can be set directly on the display of our flow meters. Thus, our sensors provide flow and consumption measurement within the standard our customers wish to use them.
While ISO 1217 (1000 mbar, 20 ° C) is generally used to measure compressed air flows, DIN1343 (1013 mbar, 0 ° C) is used to measure most industrial gases. In addition to the consumption measurement, our sensors can also be used for leakage measurement and leakage detection. Therefore, our sensors are the perfect tools to provide users with all necessary information on possible energy savings.
If you need further advice simply contact us and we will help you finding the right flow meter for your individual application scenario.
in measurement of compressed air and gases. ATEX version is available for applications in explosive areas.
The measuring sections are available in flanged version or with R resp. NPT thread.
RS 485 interface, Modbus RTU, 4...20 mA analogue output for m³/h, Pulse output for m³.
for compressed air and gases. The newly developed evaluation electronics records all measured values digitally.
The PI 500 is an all-purpose hand-held measuring instrument for many applications in the industry.
consisting of: Chart recorder DS 400 and flow sensor VA 500
available in a robust housing with and without display. Depth scale for accurate installation. Usable from 1/2" to 12" (DN 300).
Intelligent solutions for flow measurement of compressed air and gases. With and without flange available.
Up to 12 optional sensors can be connected. 7" colour screen with touch panel.
Energy analysis according to DIN EN ISO 50001, flow measurement, leakage calculation at compressed air systems.
3.5" graphic display with touch screen. Option integrated data logger. Up to 4 sensor inputs. Option Ethernet / RS 485 interface.
for energy analysis, flow measurement, leakage calculation at compressed air systems.
serves for determination of the flow direction of compressed air and gases especially in closed circular pipelines and detects smallest changes <0.1 m/s.
Measuring section made of stainless steel 1.4301 incl. ball valve, up to DN 65 (R2 1/2") with external thread, from DN 80 with weld neck flange according to DIN 2633.
If there is no measuring site with 1/2" ball valve present it can be set up by means of spot drilling collars.
By means of a special drilling device a measuring site with 1/2" ball valve can be easily set up within a few minutes.
The supplementary device "high-pressure protection" serves for a safe installation and fastening of the CS sensors VA 400 under pressure.
enables a quick, easy and accurate measurement of the wall thickness of pipes.
CS Instruments GmbH has been an expert in the field of consumption and flow measurement for many years and serves customers worldwide with the most advanced flow meters. For this reason, we offer a wide range of field proven tools for most applications. The consumption sensors of our VA550 and VA570, for example, have been developed especially for rough industrial applications. Thanks to their robust, impact-resistant aluminum die-cast housing, these flow meters can easily be installed outdoors (IP65). On request, we also offer an ATEX approval for our flow meters. Those measurement devices can be used up to a maximum pressure of 100 bar and a maximum temperature of 180 °C. Our direct immersion variants are the ideal flow meters for existing compressed air and gas lines and can be easily installed and removed under pressure via a ½" ball valve. Those flow sensors are available with different shaft lengths and can also be used in very large pipelines > DN 1000 or rectangular ducts.
Within the package of all our flow measurement devices there is always a factory calibration certificate. Optionally, ISO certificates are also available, which can be traced back to the national standard. In contrast to many other working principles, the pressure loss resulting from our consumption measurement method is negligible. Each consumption meter can be equipped with various interfaces and thus ensures the connection to your control technology, data loggers or evaluation devices. These include e.g. 4 ... 20mA, pulse, Modbus RTU, M-BUS or even Ethernet. Our thermal mass flow meters can also cover a wide range of applications and media (compressed air, carbon dioxide, vacuum, nitrogen, oxygen, ozone, natural gas, hydrogen, argon, helium, biogas, etc.)
Our philosophy is to help all our customers finding the products that exactly meet with their needs. Therefore, we are looking forward to give you a free consultation which product might be your future flow measurement device.